Cycloidal pinwheel reducer is usually a up-dated of different type transmissing machine designed with K-H-V less tooth engagement and the cycloidal pin wheel clenching system, which are trusted in drive and lowering of textile and dying, foodstuff, mining and metallurgy, Oil and chemical cranes, conveyors, task machinery etc and Market. various fields.
Features:
1. Gear is constructed of high durability low carbon alloy steel by carburizing and quenching. The hardness of tooth surface area can reach HRC58-62. CNC grinding technology is followed for all good contact overall performance, with high accuracy and gears
2. high transmission performance: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable procedure and low noise;
4, compact structure, light-weight, long service lifestyle and high bearing potential;
5. easy to check, assemble and disassemble.
Operation specifications and precautions
1.High modularization design: various equip with various electric motor or other power source conveniently.Same machine type may equip with numerous power motor. It is easy to know the combination and
junction between every equipment type.
2.Transmission ratio: good division, wide scope. The combined equipment type may form large transmission ratio, i.e. productivity suprisingly low rotary speed.
3.Form of set up: the position to be installed is not limited.
4.High strength, small: the box body is made of substantial strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and excellent grinding process, therefore the bearing capability of unitvolume is excessive.
5.Long life: Under the condition of right type chosen (including choosing appropriate operation parameters)normal procedure and maintenance, the life of main elements of speed reducer (except dressed in parts) shouldn’t be less than 20000 hours. The using parts include lubricating oil seal, oil and bearing.
6.Low noise: because main parts of speed reducer are processed, assembled and tested critically,which means noise of speed reducer is low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer
1. High swiftness ratio and efficiency
Single stage transmission can reach to at least one 1:87 of speed-downward ratio and the efficiency is certainly 
more than 90%. If make use of multi-speed get the speed-down ratio can be bigger.
2. Compact
Being adapted epicyclic transmission basic principle, the input and productivity shaft are at same axis center, it is compact.
3. Smooth and stable run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the device part is stable, the vibration and noise is bound anyway content.
1. Large deceleration ratio
A high deceleration ratio of 1/30-1/320 can be obtained.The structure is easy, but it can understand high reduction ratio machine.
2. Small gear clearance
The Drive, which meshes with ordinary gears and has minimal backlash, is vital to the controller business.
3. High precision
Multiple teeth are involved simultaneously, and there are two gears engaged with 180 degree symmetry. Consequently, the affect of tooth pitch mistake and cumulative tooth pitch mistake on the rotation accuracy is relatively average, making the positioning precision and rotation precision reach an extremely high level.
4. Less parts, easy installation
The three basic elements achieve a high deceleration ratio, plus they are all on a single axis, therefore the kit is simple to install and simple to shape.
5. Small in proportions and light in weight
Compared with the previous gear device, the quantity is 1/3, the fat is 1/2, but can buy the same torque capacity and reduction ratio, obtaining small lightweight.
6 High torque capacity
Flexible wheel materials USES specialized steel with high fatigue strength.Not the same as ordinary transmission product, the amount of teeth meshing accounts for in regard to 30% of the total quantity of teeth. In addition, it is in get in touch with with the surface, in order that the pressure borne by each gear is reduced and excessive torque capacity can be obtained.
7 High efficiency
The sliding of gear meshing parts is quite small, which reduces the energy loss due to friction. Therefore, high reduction ratio may be accomplished while maintaining high effectiveness, and miniaturization of generating motor can be realized.
8. Low noise
The gear meshing cycle velocity is low, the transmission movements force balance, which means procedure is quiet, and the vibration is very small.
◆Substantial speed ratio and excessive efficiency single-stage transmission can perform a deceleration ratio of just one 1:87, and the efficiency is more than 90%. If multi-stage transmission is used, the deceleration ratio will come to be larger.
◆Because planetary transmission principle is adopted, the suggestions shaft and end result shaft are on the same axis line, in order that the machine model can get the smallest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is larger, and the mechanism of balancing machine parts makes the vibration and voice limited by a minimum.
◆Reliable use and very long service life for the reason that primary parts are created from great carbon chromium steel, huge strength is obtained by quenching (HRC58-62), and rolling friction is used in a few transmission contacts, so the service life is very long.
Cycloid reducer is certainly a cycloid needle teeth meshing planetary transmission principle drive models, is a perfect transmission has various advantages, versatile, and will be both positive and negative operation.
•Big ratio, and huge efficiency Smooth operation,
• low noise The make use of reliable,
• long life can reach 50000 hours
• Main parts high-carbon the Ming-steel after quenching treatment (HRC58-62),
• operation and connection with rolling friction, basically no wear, durable.
• Compact structure,
• tiny size Because the utilization of a planetary transmission, the suggestions shaft and the end result shaft on the same axis, making the model to obtain the smallest possible size.
• Reasonable design, easy protection, and breakdown easily install,
• the least number of parts together with simple lubrication, cycloid reducer trusted by an individual.
(1)Size above PL/PF120(including)high torque products adopt integral double wall planet pinion carrier, precision and improve the output strength.
(2).Hoop clamp coupling have five connection techniques suitable for different application environments.
(3).Size over PL/PF120(including)precision and high power integral inner gear housing, processed in a single station,which get rid of the cumulative mistake and assembling error of split type.Eliminate casting process;adopt popular of forging process, that will decrease the blank material defects.
(4).The meshing gear adopt shaving procedure after carburizing and quenching,which simpler to make gear surface area smooth and high precision,decrease the temperature rising caused by gear surface gluing and friction.
This series worm-gear reducer was crafted after RV worm microreducer, which have a complete norm, wide speed for selection, and several mounting positions. Its overall performance and mounting dime nsions conform the same types of foreign.
The mixture of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, low noise, radiate heat efficiently, compact structure and beautiful shape.
Very good sealing and adaptability.Its combo with T gear reducer and MB/MBN variator may meet all varieties of speed requirement.