Fan Electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, removed from unused 18” or 24” China Atmosphere Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor has a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring in the middle of your electric engine, capacitor and quickness control change is still installed nevertheless the cord itself is normally detached as observed in the photos. (Find “Control Notice” below for modify type.)
T (See “Software Notice” below for utilize in various other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft can be½” (0.500″) diameter x 2 ½” 
lengthy with a collection screw simple. There are (4) threaded mounting lugs on the front of the motor, ½” long x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and also to be on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to the next).
Rate: The approximate electric motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electrical motor) is Clockwise.
Control Take notice: Motors may come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH electric fan motor china variations in the images). Both of these types of switches both control the engine just as (but you possess a rotating knob and you possess a pull-chain). If you order several engine at the same time, we can do our best to supply your order with each one sort of control or the excess.
Application Note: USUALLY DO NOT use this electric engine in a nonfan app. This is a totally enclosed fan electric motor and made to have continuous ventilation over the engine casing for cooling. The casing isn’t vented and the electrical engine will overheat and enter automated thermal overload if operate in a nonfan system where there isn’t strong ventilation past the engine. (Caution Note: the electrical motor will restart instantly when it cools back off.) Using this electrical motor for applications apart from 18 & 24″ TPI fans may possibly also overload the motor and lead it to proceed into automated thermal overload. (Your companion blade from another producer may possess a steeper blade position.)
Origin: This electric electric motor is manufactured in China.