Flexible plastic gear racks in 0.8 Mod (32DP) pitch. These racks can offer an easy to set up rotational drive of up to approx 270 degrees for example on camera focus bands. They also provide an economical remedy where a huge gear is necessary or an extended stretch (up to 2 metres) of linear motion is desired. These racks are compatible with our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER share racks are created for high precision linear motion applications. You can expect a large selection of racks which range from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Ground Racks (MRGF – MRGFD) : Has the highest power and precision in the EVER-POWER regular rack series. Bolt holes could be remachined as carburizing is usually applied only within the tooth area. J Series products are also available.
Hardened Ground Racks (KRGF-H – KRGFD-H) : Heat treated surface gears with high precision and strength has excellent cost-efficiency ratio. J Series products are also available.
Hardened Racks (KRF-H/KRFD-H) : That is a strong rack made of Chromoly steel, treated by carburizing. Has high-strength, high wear level of resistance, and enables downsizing of SR racks. J Series items are also available.
Hardened Racks (SRF-H/SRFD-H) : Stable Hardened racks with high strength, 
long life span are affordable. J Series products are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Steel Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack has the same tooth elevation and face width sizes, more compact and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low priced, large selections of modules and amount of teeth. J Series products are also available.
Metal Racks w/ Machined Ends (SRF) : Low cost, large choices of modules and number of tooth. J Series products are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low cost, large selections of modules and quantity of tooth. J Series items are also available.
Stainless Steel Racks (SUR•SURF•SURFD) : Ideal for food machinery because of SUS304 materials\’s rust-resistant quality.
Plastic Racks (DRF/DRFD/DRFK) : Plastic racks with little dimensional change, absorb lesser water than MC Nylon racks. J Series items are also available.
Plastic-type material Racks (PR•PRF) : Made form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Small pitch racks manufactured from free-reducing brass, excellent workability and high rust resistance.
Steel Round Racks (SRO – SROS) : Convenient in applications where in fact the rack has the reciprocal movement. S Type is simple to install.
Stainless Steel Round Racks (SURO) : Same dimensions as SRO racks, except in stainless. Make use of where rust-resistance is necessary.
Floor Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent products with high precision and strength, and low noise and abrasion characteristics.
Metal Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration due to larger contact ratio of helical gears.
Molded Flexible Racks (DR) : Found in applications because of its flexibility, where metallic racks do no possess this attribute. Pinions and accessories are also available.
Molded Flexible Rack Clamps (SRS) : Utilized to secure Molded Flexible Racks.
Molded Flexible Rack Pinions (SSDR) : Spur pinions utilized for molded flexible racks.
Flexible Rack Guidebook Rails (ARL) : Information Rails for Molder Versatile Racks.
We offer as standard an array of Racks in Metric and Imperial sizes. Spur Racks are available in Steel (En8) and up to 2 metres long. Stainless Steel and Delrin (Plastic) Racks are created with Spur and Helical tooth forms, square and round sections up to 400mm long. Alternative materials are available on ask for. Moulded Hostaform Racks can be found to offer an economical alternative where much less torque is required.
Variable stiffness can improve the capacity for human-robot interacting. Predicated on the mechanism of a versatile rack and gear, a rotational joint actuator called vsaFGR is certainly proposed to regulate the joint stiffness. The flexible gear rack could be regarded as a combination of a nonlinear elastic element and a linear adjusting system, providing benefits of compactness. The joint stiffness is certainly in the range of 217-3527 N.m/rad, in fact it is inversely proportional to the 4th-order of the gear displacement, and nearly independent from the joint angular deflection, providing benefits of quick stiffness regulation in a brief displacement of 20 mm. The apparatus displacement with regards to the flexible equipment rack is certainly perpendicular to the joint loading push, so the power necessary for stiffness regulating is really as low as 14.4 W, providing benefits of energy conservation. The high compactness, great stiffness range and low power cost of vsaFGR are proved by simulations and experiments.
Flexible plastic equipment racks in 0.8 Mod (32DP) pitch. These racks can offer an easy to set up rotational drive as high as approx 270 degrees for example on camera focus bands. They also provide an economical solution where a huge gear is necessary or a longer stretch (up to 2 metres) of linear movement is preferred. These racks are compatible with our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER stock racks are created for high precision linear movement applications. We offer a large selection of racks which range from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Ground Racks (MRGF – MRGFD) : Has the highest power and precision in the EVER-POWER standard rack series. Bolt holes could be remachined as carburizing is usually applied just within the tooth area. J Series items are also available.
Hardened Surface Racks (KRGF-H – KRGFD-H) : High temperature treated ground gears with high precision and power has excellent cost-overall performance ratio. J Series items are also available.
Hardened Racks (KRF-H/KRFD-H) : This is a strong rack made of Chromoly steel, treated by carburizing. Has high-power, high wear resistance, and enables downsizing of SR racks. J Series products are also available.
Hardened Racks (SRF-H/SRFD-H) : Stable Hardened racks with high power, extended life span are reasonably priced. J Series products are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Metal Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack has the same tooth height and encounter width sizes, more compact and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low priced, large choices of modules and amount of teeth. J Series items are also available.
Metal Racks w/ Machined Ends (SRF) : Low priced, large selections of modules and amount of the teeth. J Series products are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low priced, large choices of modules and amount of teeth. J Series items are also available.
Stainless Steel Racks (SUR•SURF•SURFD) : Suitable for food machinery due to SUS304 materials\’s rust-resistant quality.
Plastic Racks (DRF/DRFD/DRFK) : Plastic racks with little dimensional change, absorb lower water than MC Nylon racks. J Series products are also available.
Plastic material Racks (PR•PRF) : Made form MC nylon, can be utilized without lubrication.
Brass Racks (BSR) : Little pitch racks manufactured from free-trimming brass, excellent workability and high rust resistance.
Steel Round Racks (SRO – SROS) : Convenient in applications where in fact the rack has the reciprocal movement. S Type is easy to install.
Stainless Steel Circular Racks (SURO) : Same dimensions as SRO racks, except in stainless steel. Use where rust-resistance is required.
Surface Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent items with high precision and strength, and low noise and abrasion characteristics.
Metal Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration due to larger contact ratio of helical gears.
Molded Versatile Racks (DR) : Found in applications because of its flexibility, where metal racks do no have this attribute. Pinions and add-ons are also available.
Molded Versatile Rack Clamps (SRS) : Utilized to secure Molded Flexible Racks.
Molded Versatile Rack Pinions (SSDR) : Spur pinions used for molded versatile racks.
Flexible Rack Guideline Rails (ARL) : Guidebook Rails for Molder Versatile Racks.
You can expect as standard an array of Racks in Metric and Imperial sizes. Spur Racks are available in Steel (En8) and up to 2 metres in length. Stainless Steel and Delrin (Plastic material) Racks are produced with Spur and Helical tooth forms, square and circular sections up to 400mm in length. Alternative materials can be found on request. Moulded Hostaform Racks can be found to offer an economical alternative where less torque is required.
Variable stiffness can improve the capability of human-robot interacting. Predicated on the mechanism of a versatile rack and gear, a rotational joint actuator named vsaFGR is proposed to modify the joint stiffness. The flexible gear rack can be regarded as a combination of a nonlinear elastic element and a linear adjusting mechanism, providing benefits of compactness. The joint stiffness is certainly in the range of 217-3527 N.m/rad, in fact it is inversely proportional to the 4th-order of the gear displacement, and almost independent from the joint angular deflection, providing benefits of quick stiffness regulation in a brief displacement of 20 mm. The gear displacement with regards to the flexible gear rack is usually perpendicular to the joint loading force, so the power necessary for stiffness regulating is as low as 14.4 W, providing advantages of energy saving. The high compactness, great stiffness range and low power price of vsaFGR are proved by simulations and experiments.