• Electric motor gearboxes are maintenance-free, small power resources for driving vent, screen, home and flap ventilation systems in greenhouses.
• Single phase and 3 phase choices for your individual needs.
• Key feature of the drives certainly are a self-braking worm equipment transmission and a built-in linear limit switch device.
shaft-mounted gear motors are full electromechanical drives where the speed of the installed electrical motor is decreased to the desired value 
using two to 4 reduction stages. The drives are high performance and durable and show a concise and lightweight design.
The compact design is manufactured possible through the combination of a spur/worm gear drive with motors optimized for performance. motors also feature a 60 to 70 percent weight-loss compared to commercially obtainable drive motors. That is attained through the consistent application of aluminum die casting technology, which ensures a high degree of rigidity for the gear and motor housing concurrently.
Each drive is produced and tested specifically for every order and customer. A sophisticated modular system permits an excellent diversity of types and a optimum amount of customization to client requirements.
Thanks to their integrated control devices, the shaft-mounted equipment motors will be the ideal drives for applications in reversing setting. In both rotation directions, defined end positions are protected by two position limit switches. This uncomplicated alternative does not only simplify the cabling, but also makes it possible to configure the end positions efficiently. The high shut-off precision of the limit switches guarantees safe operation shifting forwards and backwards.
This gearmotor integrates a gearbox, an electric motor, and limit switches. It is connected with a metal shaft to turn the pinions for greenhouse ventilation. With the support of electrical panel, it could run and then stop after set quantity of turns. After that it can open up and close the windows for greenhouse ventilation to correct positions.
To keep up the delicate environment inside a greenhouse, weather control systems are a necessity. Numerous mechanical systems could be applied in this respect; however cup vent drive systems tend to be the most popular. The drive system contains a central gearmotor connected to a 40:1 correct angle reducer with dual output shafts. These OP shafts hook up to lengthy jack shafts that spread across the roof type of the greenhouse connecting to multiple rack and pinion mechanisms that open up and close large cup window panes in the ceiling for temperature control.
Based on the size of the application form (length of the shafting, volume and weight of the window panes) we offers two gearmotor solutions from a modified version of their 200 series parallel shaft series – 1/5 HP and 1/20 HP. The application form Is generally intermittent used; however the motors are rated continuous since the glass pane windows may potentially be under continuous, subtle adjustment during the day.
Gear Motor, also referred to as Electric motor Gearboxes, is a specific type of electrical motor that’s designed to produce high torque while maintaining a low horsepower, or low swiftness, motor output. Equipment motors are available in many different applications, specifically for the greenhouse, livestock and agricultural industry, our motors can be found options to operate roof vents, wall vents,roof shading and screening, they put on the shaft with chain couplings that compensate for alignment mistakes and can be easily taken out without disturbing the whole shaft.
shaft-mounted gear motors are comprehensive electromechanical drives where the speed of the installed electric motor is reduced to the desired value using two to 4 reduction stages. The drives are high performance and durable and feature a concise and lightweight design.
Did you find exactly what you were searching for concerning greenhouse gear motor? You can locate even more details on our site.