Single and double reduction planetary gear drives to be used with electric, hydraulic, atmosphere motors or mechanical power insight from high quickness, low torque sources to deliver reduced speeds at increased torques. The input part has regular SAE pads for engine mounting. Available in the three Plastic Gear Rack Output configurations proven below. Many units can be furnished with an intrinsic parking brake.
Solitary reduction drives are limited to 3500 RPM input; dual reduction drives to 5000 RPM. Units with integral parking input speed is limited to 2500 RPM.The same torque is available in either direction of rotation. Torque rankings are intermittent. For constant operation reduce torque rankings to about 1/3 to 1/2 the values shown. Devices provide 95% power transmitting efficiency.
Wheel Drive
Input side has standard SAE pads and splined input. Output side has hub for installation automobile wheel. Free wheel is possible by using the spring disconnect to disengage the drive shaft. The disengage feature is certainly regular on all 
wheel drives.
Shaft Output
Input side standard SAE pads with splined input. Output side options include: Keyed round, hexed, hollow, tapered or splined shaft.
Spindle Drive
Input side is standard SAE pads with splined insight. Output side includes a flanged spindle for coupling to the strain.
Swing Drives
Ever-Power model 6 emerges with or without essential parking brakes. The “SW” Power Wheel offers extra-large tapered roller bearings, a ductile iron hub and temperature treated ring gear to reduce backlash growth caused by wear. The exterior bearing nut supplies the supreme in shaft retention and shaft power. Output can be a spindle shaft or different sizes of integral pinion gears.