Ever-Power Company , announces its right angle NEMA gearbox designed to IP65 specs for use in wash straight down applications in packaging products and comparable machinery. Rated backlash is certainly 30 arc-minutes with choices for 4 or 8 arc-minutes. The NEMA 34 flanged gearbox has 440C Stainless bearings with seals and Nitrile o-bands shaft seals on both insight and result. All fasteners are stainless steel. Hard anodized light weight aluminum or 316 Stainless housings are available. Customizing for other than NEMA motors or your specific application is very easily 
done.
This Nema 17 stepper motor with 39mm body and 1.68A rated current, integrated with a 41mm Planetary gearbox of 5:1 equipment ratio. It’s a great choice to applications that with special space but need low rate and/or high torque.
Electrical Specification
Manufacturer Part Amount: 17HS15-1684S-HG5
Motor Type: Bipolar Stepper
Step Angle: 0.36 deg
Holding Torque without Gearbox: 39Ncm(55oz.in)
Rated Current/phase: 1.68A
Phase Resistance: 1.6ohms
Voltage: 2.7V
Inductance: 3.2mH ± 20%(1KHz)
Gearbox Specifications
Gearbox Type: Planetary
Gear Ratio: 5 : 1
Efficiency: 95%
Backlash at No-load: <=15 arcmin
Max. Permissible Torque: 3.5Nm(495.6oz.in)
Moment Permissible Torque: 6Nm(849.7oz.in)
Max. Radial Load: 150N
Ambient Temperature: -10 – 90℃
Insulation Class: B
Noise: <=50 dB
Life: 20000 h
Physical Specifications
Frame Size: 42 x 42mm
Motor Length: 39mm
Gearbox Length: 41mm
Shaft Diameter: Φ8mm
Shaft Length: 23.5mm
Key-way Length: 14mm
Number of Leads: 4
Lead Length: 320mm
Weight: 680g
Replaced by the 3325_0, a engine with the same NEMA size and same torque.
This NEMA-17 motor comes with an integrated Planetary gearbox with a 52/11 :1 ratio. It generates 16.2 Kg-cm of torque at 1.68 Amps.
When connected to a 1067 – EP, the 3317 includes a maximum rate of a little over 900 RPM. At the result of the gearbox, the stage angle is just a little under 0.35°. With all the step position in calculations, you should derive the precise step position by dividing 1.8° by the gearbox reduction ratio.
This specific revision of the 3317 is manufactured by a different producer, but should behave very much like the revision 0 version.
Brother Gearmotors NEMA C-Face Speed Reducers
The gears in these NEMA C-Face speed reducers are high strength, free of maintenance and will be mounted in any path with their slip fit “O” ring design. Low to high reduction ratios, flange mount or foot install types, right angle or hollow shaft right angle types available. Suit NEMA C-Face AC motors, brushless DC motors and brushed DC motors.
For 1/2 HP up to 3 HP Motors
NEMA C-Face, 140TC and 180TC input flanges
Inline Helical Gear Quickness Reducers
Right-Angle Hypoid Gear Speed Reducers
Product Lineup
Product Features
Allowable Torque
Downloads & Reference
NEMA C-Face Quickness Reducers Lineup
Output Power
Gear Type
Input Power
Gear Ratios
Maximum Input Speed
NEMA 56C Speed Reducers
NEMA C-Face Speed Reducers
Parallel Shaft (Foot Install)
1/2 HP
1 HP
2 HP
3 HP
5:1 ~ 200:1 3600 r/min
Parallel Shaft (Flange Attach)
Right-Angle Hollow Shaft
5:1 ~ 240:1
Right-Angle Solid Shaft
5:1 ~ 240:1
*Torque and Speed vary based on input voltage and frequency, please review item specifications for details.
Longer Life
In comparison to a spur equipment of around the same pitch size, Helical gears may transfer high loads at greater speeds. This is because of the gradual engagement of one’s teeth and easy transfer of the load.
Helical Gears
Lightweight and Compact
Die cast aluminum equipment housings make these quickness reducers light in weight, allowing engineers to design less expensive mounting provisions
Maintenance Free
High-quality synthetic grease is utilized in every gearboxes. They are loaded at the factory and do not require maintenance filling or level checks. This saves precious time at create and eliminates concern for pricey oil disposal necessary by the EPA.
Mount in Any Direction
These gearboxes are sealed with machine “slip” match “O” rings and double lip spring shaft seals upon both motor and input shaft and output shaft driver. Thus, the gear motors can be mounted in any conceivable direction without concern for the position of a breather connect.
NEMA Output Flange Planetary Gearboxes, Max. Ratio 1000:1
Spec
Gearing Arrangement:Planetary,Spur
Frame Size:42.6/60/90/115/145 mm
Ratio:3~1000:1
Nominal Output Torque:8~215 N.m
Nominal Input Speed:2500~4000 rpm
Max. Input Speed:5000~6000 rpm
Backlash:12~15 arcmin, three stages, 6~9 arcmin, single stage, 8~12 arcmin, two stages
Noise Level:60~67 dBA/1m
Enclosure:IP65
Lubrication:Synthetic Lubricant
Key Features
The Ever-Power EP Series gearboxes include a NEMA output flange with metric shaft, to offer exceptional torque ratings and convenience of many of present servo and stepper movement control applications. The gearboxes are drop-ins for most industry standards and available from single to three phases with ratios 3:1 up to 1000:1, the best backlash of < 6 arc-a few minutes. Adapters for all servo and stepper motors.
Features:
5 frame sizes with NEMA 17, 23, 34, 42, 56 flange and metric shaft
Backlash as low as 6 arc-minutes
Ratios up to 1000:1
High radial and axial loading capacity
20,000 hours service life
Synthetic grease, free of maintenance
Reliable operating performance, cost effective integration