Ever-Power Company , announces its right position NEMA gearbox designed to IP65 specs for use in wash down applications in packaging products and comparable machinery. Rated backlash can be 30 arc-minutes with choices for 4 or 8 arc-minutes. The NEMA 34 flanged gearbox has 440C Stainless bearings with seals and Nitrile o-rings shaft seals on both input and output. All fasteners are stainless. Hard anodized aluminium or 316 Stainless housings can be found. Customizing for other than NEMA motors or your unique application is very easily done.
This Nema 17 stepper motor with 39mm body and 1.68A rated current, integrated with a 41mm Planetary gearbox of 5:1 equipment ratio. It’s a good solution to applications that with unique space but require low acceleration and/or high torque.
Manufacturer Part Number: 17HS15-1684S-HG5
Motor Type: Bipolar Stepper
Step Angle: 0.36 deg
Keeping Torque without Gearbox: 39Ncm(55oz.in)
Rated Current/phase: 1.68A
Phase Resistance: 1.6ohms
Inductance: 3.2mH ± 20%(1KHz)
Gearbox Type: Planetary
Gear Ratio: 5 : 1
Backlash at No-load: <=15 arcmin
Max. Permissible Torque: 3.5Nm(495.6oz.in)
Moment Permissible Torque: 6Nm(849.7oz.in)
Max. Radial Load: 150N
Ambient Temperature: -10 – 90℃
Insulation Class: B
Noise: <=50 dB
Life: 20000 h
Frame Size: 42 x 42mm
Motor Length: 39mm
Gearbox Length: 41mm
Shaft Diameter: Φ8mm
Shaft Length: 23.5mm
Key-way Length: 14mm
Number of Leads: 4
Lead Length: 320mm
Replaced by the 3325_0, a motor with the same NEMA size and same torque.
This NEMA-17 motor comes with an integrated Planetary gearbox with a 52/11 :1 ratio. It generates 16.2 Kg-cm of torque at 1.68 Amps.
When linked to a 1067 – EP, the 3317 has a maximum acceleration of a little over 900 RPM. At the result of the gearbox, the stage angle is just a little under 0.35°. With all the step position in calculations, you should derive the precise step position by dividing 1.8° by the gearbox reduction ratio.
This particular revision of the 3317 is made by a different manufacturer, but should behave very much like the revision 0 version.
Brother Gearmotors NEMA C-Face Speed Reducers
The gears in these NEMA C-Face speed reducers are high strength, free of maintenance and can be mounted in any direction with their slip fit “O” ring style. Low to high decrease ratios, flange mount or foot mount types, right position or hollow shaft right angle types available. Fit NEMA C-Face AC motors, brushless DC motors and brushed DC motors.
For 1/2 HP up to 3 HP Motors
NEMA C-Face, 140TC and 180TC input flanges
Inline Helical Gear Quickness Reducers
Right-Angle Hypoid Gear Speed Reducers
Downloads & Reference
NEMA C-Face Speed Reducers Lineup
Maximum Input Speed
NEMA 56C Speed Reducers
NEMA C-Face Speed Reducers
Parallel Shaft (Foot Mount)
5:1 ~ 200:1 3600 r/min
Parallel Shaft (Flange Mount)
Right-Angle Hollow Shaft
5:1 ~ 240:1
Right-Angle Solid Shaft
5:1 ~ 240:1
*Torque and Speed vary based on insight voltage and frequency, please review item specifications for details.
In comparison to a spur gear of around the same pitch size, Helical gears may transfer high loads at greater speeds. This is because of the gradual engagement of the teeth and simple transfer of the strain.
Lightweight and Compact
Die cast aluminum gear housings make these quickness reducers light in weight, allowing engineers to create more economical mounting provisions
High-quality synthetic grease can be used in every gearboxes. They are filled at the factory and do not need maintenance filling or level checks. This saves valuable time at setup and eliminates concern for expensive oil disposal required by the EPA.
Mount in Any Direction
These gearboxes are sealed with machine “slip” match “O” rings and double lip spring shaft seals on both motor and insight shaft and output shaft driver. Hence, the gear motors can be mounted in virtually any conceivable direction without concern for the positioning of a breather plug.
NEMA Output Flange Planetary Gearboxes, Max. Ratio 1000:1
Frame Size:42.6/60/90/115/145 mm
Nominal Output Torque:8~215 N.m
Nominal Input Speed:2500~4000 rpm
Max. Input Speed:5000~6000 rpm
Backlash:12~15 arcmin, three stages, 6~9 arcmin, single stage, 8~12 arcmin, two stages
Noise Level:60~67 dBA/1m
The Ever-Power EP Series gearboxes are equipped with a NEMA output flange with metric shaft, to provide exceptional torque ratings and convenience of many of present servo and stepper motion control applications. The gearboxes are drop-ins for most industry standards and offered from solitary to three stages with ratios 3:1 up to 1000:1, the very best backlash of < 6 arc-mins. Adapters for all servo and stepper motors.
5 frame sizes with NEMA 17, 23, 34, 42, 56 flange and metric shaft
Backlash as low as 6 arc-minutes
Ratios up to 1000:1
High radial and axial loading capacity
20,000 hours service life
Synthetic grease, free of maintenance
Reliable operating performance, cost effective integration