3 Backlash Levels, only 3 arc-min
IP65 environment protection
Motor adaptors for just about any servo electric motor, 50w through 5kW
24 hour delivery
he Circulute 3000 Reducer is EP’s next era cycloidal swiftness reducer. It utilizes 52100 grade bearing metal on all of its speed decrease components. It is offered with a full two year warranty, not tied to hours of procedure, and can endure abuse that could break the teeth of ordinary rate reducers.
The EP 3000, readily available with inputs for both servo and induction motors, includes a compact style with single reduction ratios of 11:1 to 71:1 at 95% operating efficiency. Provided in two backlash ratings and multiple mounting choices, the EP 3000 includes a design challenging enough for both servo and standard induction engine applications. The initial two piece pin casing design guarantees output shaft backlash rankings of less than 6 arc-min.
The EP provides a solution for ultra-high precision, obtaining accuracies up to 20 arc-seconds. The EP allows a credit card applicatoin to reach negligible backlash, maintain extraordinary rigidity, and maximize control stability to ensure that the desired output motion could be easily achieved. The look is truly a distinctive concept, utilizing a full get in touch with screw-like tranny for high performance and elimination of wear. The unit provides maximum compactness using orthogonal axes and includes a big hollow shaft for versatility.
WORM SERVO GEAR REDUCER
Wide variety of servo gearboxes, designed to fit virtually all servo motors on the market
Designed for the best torsional stiffness and the lowest angular backlash, pertaining to the utmost torque and overhung loads
Bush with slot machine games and hub clamp for servomotor coupling
Enhanced dimensional compactness because of direct servomotor coupling
Widest range of possible servomotors coupling dimensions.
The correct technical solution thanks to a comprehensive range of sizes, gear stages, transmission ratios, designs and nonstandard designs.
Servo equipment reducers (worm, coaxial, helical and bevel helical units) Catalog SR
Operating instructions for gear reducers and gearmotors (UTD.045)
EP Drive Systems, Inc. is very happy to announce the expansion of our range of Servo Reducers, right now offering five levels of precision to meet any software requirements. The five degrees of precision available allows a machine developer to select the mandatory reducer precision to meet their needs and their spending budget. They are available in both in-collection and right-angle variations, in torques up to 7,376 lb.ft. and ratios to 3,392:1.
Normal applications for these reducers include rotary & linear axis drives, and material handling axis drives. Industries served include Material Managing, Automation, Aerospace, Machine Tool and Robotics.
The installation faces of the HT, HP, Electronic and B versions are identical, which makes it possible to interchange a unit with an increased or lower accuracy unit if needed.
A wide range of engine couplings and installation flanges are available for the entire reducer range to mount virtually any servo electric motor and the hollow bore output can be used to attach output shafts, pinion shafts, or other drive elements.
These reducers are usually selected based on the peak cycle forces, which often happen during accelerations and decelerations. These cycle forces rely on the powered load, the swiftness vs. period profile for the cycle, and any other exterior forces functioning on the axis. For more selection details, please follow this PDF hyperlink.
For application & selection assistance, please call, fax or email us. Your application information will be examined by our engineers, who’ll recommend the very best solution for the application.
EP Inc. offers a full range of modular servo gearboxes /worm reducers. The modular style permits configurations with motor input flange and output pinion for rack and pinion drives, and also solid result shafts, Hollow bore output, and input shafts for all the positioning applications. The modular style allows for universal mounting of the gearbox in any orientation.
They can be utilized on motors with a NEMA23 standard flange through an adaptor package. As the gears are naturally angled, they lead to a short total length of the electric motor and its gear.
The series may also be delivered both right- and left-angled and with output shafts on both sides. A 30-mm machine recess for centering and a 4 M5 threaded mounting hole may also be built on the gear’s output side.
Built with a straightforward and robust style, the series offers gearing ratios that range between 6:1 to 75:1. An individual may also customize the components through the order, so as to match the gear to its intended app.
The Precision Planetary Gears of the EPRG series contains a thorough range of low backlash planetary gearboxes, with up to class 3′ precision, obtainable in several gear frame sizes, with single or multiple stage reduction (for gear ratios from 1:3 to 1 1:1,000). These models likewise incorporate versions with double shaft, right position shaft and right position output, in addition to a full selection of adapters for engine mounting, making them with the capacity of meeting certain requirements of even the most different applications. They are designed for use with integrated servo and stepper EP motors, mounted directly or via adaptor flanges, but may also be used in combination with other EP motor types. This range of products is based on years of encounter and represents the end result of a decade-long analysis aimed at improving performance.
Optimum precision and dynamics, coupled with outstanding torque density, are the key requirements specified for reliable servo gearboxes used. EP provides servo gearboxes for just about any app and any functionality range. Our low-backlash planetary and right-position gearboxes reflect our enthusiasm for advancement and the highest levels of precision.
Worm equipment reducers provide market enhance solution with performance and flexibility. Low amount of basic models could be applied to a wide selection of power ratings guaranteeing top performance and decrease ratios from 5 to 1000.
Gear reducers and servo gearboxes of EP Precision Machinery Co., Ltd. are designed for high-performance mechanical equipment. When the motor quickness must be reduced, the output torque improves and send torque totally to the application form. We believe that customers will appreciate our equipment reducer to attain their demand. Just check out EP, you may get more information regarding servo gearheads, servo gearboxes, and gear reducers. We continue to keep in the years ahead for your support.
Plug the Rate Reducer in to the desired channel of your receiver, and connect the business lead from your servo (or servo wye) in to the man servo lead from the circuit board. The set screw on the blue trim pot, located near the top of the primary circuit board, is utilized to control the rate of the servo. Change the set screw completely clockwise (CW) for regular servo speed without speed reduction, fully counter-clockwise (CCW) for maximum speed reduction, or any place in between for partial swiftness reduction. The reddish colored LED indicates three possible conditions: Slower Blinking = No Transmission; Solid On = No Velocity Decrease; Fast Blinking = Reduced Acceleration Setting
Please note that in the event that you make any alter to the speed setting while the receiver is on, you must cycle power to the receiver (convert if off and back again on) for the brand new speed environment to take impact. This circuit may also be used in conjunction with our Servo Reverser to cause flap or retract servos to carefully turn in reverse directions for appropriate function. Guidelines are included for easy installation and use.
IMPORTANT NOTE: This product will only work on a regular, proportional servo. You won’t work on a retract-type servo, as they do not understand any servo positions apart from clockwise (CW) and counter-clockwise (CCW). Retract servos cannot be slowed down, also by a transmitter which includes this function, as their design and electronics don’t allow it. Examine the FAQ page for more information.
This device will certainly reduce the speed of any regular, proportional servo. Connect it in the middle of your receiver and the servo (or servos) you intend to control for a far more scale-like movement of flaps or retracts. Adjustable, it could be set to reduce the speed of your servo from super-slow motion to no speed reduction at all, with an nearly infinite number of positions among. Maximum reduction period for a servo to travel 90 degrees is approximately 14 seconds, minimum period (no reduction) is simply the normal swiftness of the servo. Great for reducing or removing the tendency of a plane to “balloon up” when flaps are deployed. It can be utilized to control several servo by utilization of a regular servo Y.
This is actually the new regulated version that can be utilized on radio systems powered by any size or kind of battery, including 4.8-6.0 volt 4-5 cell Ni-Cad/Ni-MH electric batteries, and HV (high voltage) receivers that operate on 2-cell 6.6-8.4 volt Li-Po/Li-Ion/Existence batteries. This unit will NOT reduce the voltage going to your servos.
The EP Gear Reducer may be the perfect solution for servomotor applications such as for example packaging machines, gantries, injection molding machines, pick and place, and linear slides.Provided in concentric shaft, right angle solid shaft, and right angle hollow shaft designs with modular adaptor flanges and keyless compressible bushings to very easily mount to any manufacturer’s servo electric motor. The EP Series helical gears have slanted teeth in comparison to spur gears with directly cut teeth, generating a smoother gear mesh, yielding considerably lower noise levels.
The low backlash EP planetary servo gear units are created for the 30 to 350 Nm (265 to 3100 lb-in) torque classes. These were designed to combine the best possible flexibility and cost-efficiency because not every application requires high-performance elements.
They offer a basis for diverse, dynamic and cost-optimized drive solutions.
The EP planetary servo equipment units can be found in the following versions:
PSC = B5 output, even output shaft
PSKC = B5 output, with keyway
PSCZ = B14, result, smooth output shaft
PSKCZ = B14 output, with keyway
servo gear reducer, the appropriate option for you.