Slewing Bearing

Slewing bearing is identical to normal bearings, it assembly by rings and rollers. Nevertheless, compare on track bearings, slewing bearing has a lot of variations. Normally, slewing bearing has huge dimensions, OD generally betwwen 0.4m to 10m, and some even to 40m. Under normal instances, slewing bearing functioning in a low speed, high load state. Slewing bearing comes with installation holes, lubricating holes and sealing device. It has small stucture, convenience to guide rotate, simple set up and easy maintenance etc.

EPT slewing band bearings can be purchased in many models with internal, external or without gear. The low cross section, hefty load capacity and integrated gear make these bearings great structure components. Slewing ring bearings are widely used in building machinery, mining apparatus and several other industrial products.
Slewing bearing is definitely a huge of bearing with distinctive structure that can bear integrated load just like axle load, radial load and overturning load. It combines support, rotating, tranny, fixed, sealed, anti-corrosion and different functions into one unit. Trusted in lifting machinery, construction machinery, tranny machinery, mining and metallurgy machinery, medical gear and radar, deliver, wind power and additional industries.

Slewing Ring Bearings are precision built to manage various load types which includes radial, axial, moment or perhaps a combination of each. Their unique construction and small footprint help facilitate simple mounting and repair. Seals are common for retaining grease and keeping contaminants out. Re-lubricating holes are included into the design, evenly distributed around the bearing, to permit for grease replenishment which allows reduce friction and use and extend bearing existence.
The Single-Row Ball type Slewing Ring have four points with one row. They could bear axial load, radial load and tilting second at the same time. And they are composed of two seat rings, which design in small structure and light weight, steel ball contact with the circular raceway at four items. There will be three types of this kind of single row 4 things contact ball slewing bearing: without equipment bearing (non tooth), exterior gear bearing (external tooth), and Internal gear bearing (internal tooth).
EPT slewing band bearings can support radial, axial and tilting instant loads performing either singly or perhaps in combination and in any direction. Therefore, it is possible to replace the combination arrangement of radial and axial bearings by a single bearing, that will measurably decrease the overall cost and simplify the look. Slewing rings are sealed on both sides, lubricated with top quality grease, can be relubricated via lubrication nipples and are particularly simple to install.

The ball size is normally chosen with regards to the axial load and radial load arriving on the Slewing bearing. It varies from 10 mm to 60 mm. The loads happen to be calculated using software to make sure correct selection for the slewing bearing. The material collection is done based on the input parameters and the requirement of the customer. Generally, the materials selected for slew band is C45 and En19 or 42CrMO4. Excavator and crawler applications as well as the boom cranes generally have the materials as 50Mn. The balls are made from High chromium metal, generally denoted by 100Cr6 and the cages are made from either nylon 6 or nylon 66 according to the load conditions.
We makes slewing band bearings for use in a number of demanding industries such as heavy equipment, oil and gas, medical systems, renewable strength and semiconductor making. These versatile bearings happen to be specifically made to handle large, major, slow-oscillating loads like those in cranes, booms and lifts, yet can be used in high-precision applications such as for example CT scanners and industrial positioners.