worm gear speed reducer

worm gear speed reducer
Single reduction worm gearing provides high ratio reduction with couple of shifting parts in a close-coupled small drive. The proper angle set up of driving-to-driven machine takes a the least space. Input and output shafts can be extended in either or both directions in horizontal or vertical arrangements adaptable to any installation requirement. Efficient electric motor speeds are decreased to slower speed requirements of many industrial machines in a single reduction.
Product Features
Ratios 5:1 to 70:1
Hollow & Solid Output Shafts
Vertical & Horizontal Mounting
Fan Cooled (Standard)
Motor Mounts (C-Face Adapters or Scoops)
Cast Iron or Steel Housings
Products
The exclusive usage of the involute Helicoid Thread form (with departing side contact) on the worm and gear provides for high efficiencies, and lengthy service lifestyle. The hardened ground and polished alloy steel worm develops a simple, work hardened surface area on the bronze equipment. For this reason worm gears use in and improve with prolonged service while additional gears are deteriorating. Ever-Power offers a broad collection of model configurations, sizes, ratios, and add-ons from our standard products.
Fabricated Designs
If your application involves serious shock loads or feasible housing damage from external sources (as in steel mills or mobile devices applications) Ever-Power can provide fabricated steel housings with up to a 48″ center distances. Fabricated housings provide optimum rigidity and strength that allows the tranny of higher horsepower levels than are possible with standard cast iron products. Extra heavy side plates connect the worm and gear shaft bearing supports, assuring appropriate meshing of the apparatus under all load circumstances. In smaller sizes, fabricated steel reducers are interchangeable with Ever-Power regular cast iron reducers.
Custom Designs
Ever-Power can provide custom rate and reversed engineered reducers for the application, be it a new project or a direct drop-in replacement for a competitor’s velocity reducer. Fabricated steel reducers allow Ever-Power to complement a competitor’s footprint, centerline, and shaft elevation allowing a primary drop-in alternative saving the client time and money.
Long – Quiet Life
All worm gears in Ever-Power reducers are produced from phosphorous bronze. Our design also incorporates a hardened, ground and polished alloy steel worm. This mixture develops a even, work-hardened mating surface area of the bronze gear which improves with prolonged service.
Worm gearing is a class of gear reducers that utilizes right angle, nonintersecting shafts. This style of reducer provides clean and quiet operation and permits the possibility of large swiftness reductions. These gears can be found from stock in a wide variety of ratios, from only 4:1 to as much as 3600:1. The small design and construction allows worm equipment reducers to be positioned in a relatively small space. Thus, high reductions in a limited package size can be achieved with this configuration. Our worm gear features the continuous sliding tooth actions between worm and the teeth. This increases the tolerance for weighty loads and shock loads. Worm gear drives offer users high reducing convenience of relatively low cost when compared to some other types of gearing.
The utilization of worm gearing extends across many industries including food, beverage and grain and has many applications. Some applications that use worm gearing are: conveyors, mixers and bucket elevators.
Ever-Power worm equipment reducer gearbox series base on years of experiences uses designed teeth surface area with unsurpassed torque transfer efficiency with great overall performance, efficency and cost.Worm gear program transmits power through sliding get in touch with, leading to extremely low vibration , noise, little backlash and self-locking property
-Housing:One time we casting creats great rigidity for severe impacts. Outer cooling fins and internal lubrication oil diversion channel design to increase heat dissipation.
-Worm Shaft: Manufactured with Carbon alloyed Metal S45C or SCM415, precison machined and carburized to HRC45 or HRC60, then for precision tooth grinding to ensure maximum contacting.
-Worm Wheel: Manufactured with Carbon alloy ALBC2, teeth are machined by precision CNC hobbing machine to sustain high impact.
A worm gear reducer is one type of reduction gear box which consists of a worm pinion insight, an output worm gear, and includes a right angle result orientation. This type of reduction gear box is normally used to take a rated motor velocity and produce a low speed result with higher torque value based on the reduction ratio. They often can solve space-saving problems since the worm equipment reducer is among the sleekest decrease gearboxes available because of the little diameter of its result gear.
worm gear reducerWorm gear reducers are also a favorite type of velocity reducer because they offer the greatest speed reduction in the smallest package. With a high ratio of speed decrease and high torque result multiplier, it’s unsurprising that lots of power transmission systems utilize a worm equipment reducer. Some of the most common applications for worm gears can be found in tuning instruments, medical screening equipment, elevators, protection gates, and conveyor belts.
SW-1 and SW-5
Torque Transmission provides two sizes of worm gear reducer, the SW-1 and the SW-5 and both are available in a range of ratios. The SW-1 ratios include 3.5:1 to 60:1 and the SW-5 ratios include 5:1 to 100:1. Both these options are produced with durable compression-molded glass-fill up polyester housings for a durable, long lasting, light weight speed reducer that is also compact, noncorrosive, and nonmetallic.
Features
Our worm equipment reducers offer a choice of a good or hollow result shaft and feature an adjustable mounting position. Both the SW-1 and the SW-5, nevertheless, can withstand shock loading better than other reduction gearbox styles, making them perfect for demanding applications.
Rugged compression-molded glass-fill polyester housing
Light-weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Reducers also known as worm gearbox or worm swiftness reducers. Worm equipment reducers are used for speed decrease and raising the torque for electrical electric motor drives. You can decide to attach your NEMA engine to the reducer by using the NEMA C face flange or make use of a coupling. If you need a coupling for the output or input shaft discover our coupling section for selecting a coupling. You can expect four assemblies left hand and right hand and double result shaft and shaft insight and shaft result. Interchangeable with the majority of worm gear manufactures. Find data sheet in item overview for diamensions. If you don’t see your type, make sure you Contact Us.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Models for 56C and 145TC Motors
Ever-Power DDVM series triple-reduction worm gear swiftness reducers are available in ratios from 5000:1 to 175,000:1 and center distances from 7” to 20” (larger sizes available on request). Result torque ranges from 33,000 in lbs. for the 7” CD DDVM-70 to 582,900 in pounds for the DDVM-200. Mechanical HP input requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers can be found in four configurations: horizontal, vertical, shafted, and shaft mounted.
These reducers are perfect for water/waste-water gear drive applications such as thickeners and clarifiers, which need a vertical straight down shaft. Other offered configurations also make Ever-Power triple decrease reducers perfect for make use of on mixers, elevators, solar power panels, astronomical telescopes, indexing tables, hoists, conveyors, or additional process or components handling systems where large torques/sluggish speeds are needed.
These reducers are also obtainable with a helical principal reduction stage and so are termed the HDVM series
Product Features
Ratios 5000:1 to 175,000:1
HP from 0.09 to 6.25.
Output Torque to 583,000 in lbs.
Output RPM only 0.01 with a 1750 RPM input.
Ideal for ultra-slow swiftness, high torque applications
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Versions for 56C and 145TC Motors
Description
The HDR Series worm equipment reducers are used in low to moderate horsepower applications to lessen speeds and increase torque. Worm gear reducers can be found in direct or indirect drive, direct drive models are 56C or 145TC flange mount with either right, still left or dual result shafts or a hollow bore result. The indirect drive models are shaft input-shaft result boxes for use with sprocket or pulley drive systems. They provide an effective low priced solution to speed decrease and improved torque, with higher tolerances for shock loading than helical equipment reducers.
In order to decide on a gearbox speed reducer, you will need to determine the mandatory torque and provider factor for the application form. Click on “Specs” above for a table that will aid in identifying the service element. For service factors above 1.0, multiply the required torque by the services factor.
Our regular 700 Series – the heart of Ever-Power speed reducer product line – has been serving industry reliably for over 40 years. Its proven modular design has set the sector standard for efficiency and is the most imitated product in the current worm gear rate reducer market. But why accept a knock-off when you can have the original – from Ever-Power.
Specifications
11 basic single reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting versatility permits installation in practically any position.
Housings are straddle-milled, top and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for optimum durability, in addition to greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal life.
Both 2D and 3D CAD drawings are available in our eCatalog.
TheIncreased Quality! Industrial Rated! Inexpensive!One-piece gearcase, without exterior ribs, is made of close-grained cast iron and for rigid equipment and bearing support. It also offers excellent warmth dissipation.Dual lip, spring-loaded seals guard against oil leakage and stop dirt from entering.Stepped shafts with oversized ball andtapered roller bearings.Carbon steel shafts for greater power.High tensile strength cast bronze worm wheel and hardened and surface alloy steel worm made intregal with the shaft for long and trouble-free life.Essential oil sight gauge for ease of maintenance (not available on sizes 25 and 34).Factory oil filled.Every device test run prior to shipment.Universal mounting with bolt-on ft.Highly modifiable design.All this at substantially decrease prices than you have been accustomed to paying for reducers of lesser quality. Less