Worm get gearbox with motor
worm motor
A robust worm-drive gearbox powered by an MM28 electric motor. Ideal applications where a simple to fit, high torque end result is required. Great for student based assignments which includes robots and buggies.
The machine has been designed to ensure that the output shaft could be ‘clicked’ in and out for modification. Electronic.g. cutting down to size. The engine is snap fitted into its cradle to activate the gear and worm.
Details
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + electric motor: 35(W) x 40(H) x 60(L)mm
The primary feature of the high-efficiency gear box is a worm gear, which locks the output shaft whenever the motor isn’t turning. The high gear ratios of 216:1 or 336:1 make this gearbox appropriate for little strolling robots, lifting mechanisms, and other applications where huge torque is desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draw up to a few amps, making them ideal applicants for the DRV8833 motor driver carrier. Engine overheating can be caused by excessive stalling, also at very low voltages. We advise that you utilize stall-detection sensors, or just look at your robot, to ensure that it doesn’t stall for lots of seconds at a time.
This gearbox includes a 4 mm diameter, round output shaft, which works together with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also fits on the smaller threaded end of the shaft, though it is not particularly intended to work with this type of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors happen to be economical, right-angle, worm-geared motors that install easily found in the tightest applications. Economical right angle worm geared motors arranged new criteria for reliability, performance and economy with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly design offers easy integration today and a future proof alternative. The Ever-Power gear motor offers total flexibility in mounting options includes shaft, base, face, and flange alternatives. The electric motor terminal box could be mounted in alternate positions rotated in 90º steps around the electric motor frame offering for unparalleled integration possibilities.
Ever-Power gear motors comply with North American and International standards, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a genuine total option for our global customers.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose proof,and can be utilized outdoors or in wet and dusty environments without the use of additional enclosures. Complete rated output is available at the result shaft of the machine.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Additional features:
Connecting with Connect connectors.
With integrated inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the solution for applications requiring a corner turn, optional dual output, or perhaps an inability for the motor to 
be back again driven. The DC correct angle gear motors are made for continuous and intermittent duty operation. Our right angle equipment reducers are designed with a number of mounting plate options, making them well suited for a number of DC engine based applications. We offer 12 ratios which range from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ time (varies by application)
EP Products Worm Equipment Motors are designed to generate high torque in a small package size. Worm Gear Motors are great for applications that want a personal- locking or breaking feature since the output shaft can’t rotate when there’s no power used. Additionally, Worm Gearheads can transfer motion in 90 degrees. With various reduction ratios, precision minimize gears, voltages and sizes, EP Products has a DC Worm Equipment Motor solution for your application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Gear Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Security Door Locks / Industrial Conveying Devices / Security Gates / Dental care Seats / Ambulance Cots & Stretchers Quite a few DC Motors could be complimented with one of our Worm Gearheads. EP Items will work with you to design and produce a Worm Gear Electric motor which will optimize the overall performance of your unique application.
Built to your specific requirements
Electric motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Slice / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm engine uses a metal gear box for toughness and a high torque output. Because of the special mechanical framework of the worm get the electric motor output shaft can be self locking and will not be rotated.
This part uses a two wire connection and supports direction control along with PWM speed control. Ranked voltage is 12v and can obtain 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear models from EP DRIVESYSTEMS especially display their power in applications where great gear ratios are essential. Our worm geared motors are therefore optimally suited for make use of in intralogistics, packaging technology and the meals & beverage industry.
Four great known reasons for EP worm geared motors:
Rugged
Our worm geared motors have a higher overload capacity
Maintenance Friendly
Washdown versions enable simple and effective cleaning of the drive system.
Corrosion protection
The NSD tupH sealed surface conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Flexibility
Our modular style give users maximum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are many applications that require drive systems, and each one of these has its own unique requirements. The EP series worm equipment motors can be quickly and efficiently adapted to satisfy your needs.
Worm gear products impress with their large power density and small style. If required, we can also source them with the impressive nsd tupH surface area treatment.
As well as the basic EP housing, we offer an extensive type of bolt-on components to customize the product including torque arms, shaft addresses and output flanges. These can be easily field set up, but we will also be pleased to assemble the average person components for you.
Discover more about the modular SI worm geared motors!
Find out more
Smooth and Clean: The EP worm equipment unit SMI
SMI worm gear products feature a smooth, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface conversion makes this product ideally suited for harsh and challenging industries like meals processing and pharmaceuticals.
Flexible input designs such as NEMA, IEC or direct motor mounts in extra foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared motor program. The units have got on all sides numerous fixing possibilities and enable a simple assembling for the customer.
Various other drive configurationscan be created by use of built-in components (e.g. torque arm and result flanges). The housings are created in light weight building out of aluminium die cast. Engine attachment is realised in general through IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:output shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Buy Worm Get Gearbox with Electric motor – incorporating the following features: 1 to 6V voltage ranking, 17100 rpm no load speed, 220g-cm stall torque, 3mm shaft size, 60mm long, 35mm vast, 40mm high, a robust worm get gearbox powered by an MM28 electric motor (included), most suitable for applications where an easy to match, high torque productivity is necessary, nylon housing and gear, requires light oil or perhaps silicon grease lubrication, ideal for student based tasks including robots and buggies.
Most ideal for applications where an easy to match, high torque end result is required
Perfect for student based projects including robots and buggies
Reversible Huge torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Reversible Great torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Features:
The motor is Gear DC engine with micro-turbine worm, you can transform the wiring-connection to change motor rotation.
Turbo worm geared engine with self-lock, that is, regarding motor without electrical, the productivity axis is usually fixed, self-lock.
The reducer output shaft arranged vertically with the engine shaft, whole engine output shaft relatively-short than general gear electric motor, trusted to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the windowpane, door, Mini winch. Ect.
In sumo robot or combat robot competition where huge holding torque’s motor is essential in order to avoid your robot being pushed by your opponent robot. The worm equipment is definitely a much better option when compared to spur gear motor. Why is worm gear so special? Check this wiki out: Worm Drive.
“Unlike with ordinary equipment trains, the path of transmission (insight shaft vs result shaft) isn’t reversible when working with large reduction ratios, due to the greater friction involved between the worm and worm-wheel, when usually a single start (1 spiral) worm can be used. This is normally a advantage when it is desired to remove any possibility of the output driving the input.”
In other phrases, it is difficult to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g
Expand your understanding of worm motor.