Our standard 700 Series – the heart of Ever-Power velocity reducer products – has been serving industry reliably for over a decade. Its proven modular design has set the industry standard for performance and is the most imitated item in today’s worm gear swiftness reducer marketplace. But why accept a knock-off when you can have the initial – from Ever-Power.
Specifications
11 basic solitary reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Worm Reducer Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting versatility allows for installation in virtually any position.
Housings are straddle-milled, best and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for maximum durability, and also greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings are available in our eCatalog.
Ever-Power worm gearboxes possess earned a reputation to be a business benchmark worldwide. Our achievement came from our relentless drive for quality with state-of-the-art technology, all while offering worm gearboxes are inexpensive prices. High flexibility accorded through a wide choice of mounting choices, shaft configurations and motor interfaces, makes the Ever-Power worm gearbox the default choice for the market. The helical-worm and the double-worm edition, with or without the torque limiter, soon add up to the advantage, creating an extremely versatile drive system.
Ever-Power Worm gearboxes provide high torque with low quickness gear ratio. Being simple and compact in style, these gears can perform higher gear ratio compared to the helical gears. These worm decrease gears having screw type characteristics are similar to helical gears, but its helix position is typically comparatively larger) and its body is generally quite lengthy in the axial path. The gears in these gearboxes can be right or left-handed depending upon the purpose.
Mounting option include universal housing, part flanges, foot (horizontal and vertical), shaft mounted with torque arm. Available in Solid shafts (one or double), with torque arm or torque limiter.
Worm reduction gears features
Principles
A worm gear is a kind of interlocking gear made up of a worm shaft and worm wheel. The worm is certainly shaped like a screw and the worm wheel is usually a type of gear machined to have a tooth profile with the same configuration.
The procedure of a worm gear is comparable with that of a bolt and nut. The principle is equivalent to a nut that is fixed so that it cannot rotate and therefore progresses in the axial path when the bolt is turned.
The design of a worm gear is considered through the relationship between your rack and spur gear on the middle plane of the worm wheel.
Features
High reduction ratio One rotation of the worm rotates the worm wheel by one tooth. Because of this, in a 1 speed decrease gears, the wheel can be manufactured therefore that it’ll be rotated 1/60 (1/120 in unique applications).
Orthogonal shaft The shafts are aligned orthogonally due to the structure. This characteristic makes it possible to layout the turning transmission direction at the right angle.
The arbitrariness of the rotation direction The screw direction of the worm can be clockwise or counterclockwise (generally clockwise). It is possible to change the rotation direction of the worm wheel by changing the screw path.
A multitude of shaft layouts The wide selection of shaft layouts is one of the top features of interlocking gears.For example, right shaft output, remaining shaft output, dual shaft input and dual shaft output, etc., combine for a complete of 14 types (Determine 2) and, if attachment orientations are included, it is possible to pick from over 40 layouts.
Low noise, low vibration The interlocking of the worm and worm wheel can be characteristic since the contact is usually linear and the relative slide is great. In comparison to rolling power transmission, sound and vibration are extremely low. Because of this, this technology can be used to drive medical equipment, elevators and escalators, etc.
The principal specifications of worm reduction gears
MA Series(Small)
Center distance(mm) 32,40
Reduction ratio 10,20,30,40,50,60
Input capacity(kW) 0.1～1(at an input of 1800 rpm)
Output torque(N・m) 20～66
Input speed(rpm) 0～1800
MA Series(Medium)
Center distance(mm) 50,63,80,100,125,140,160
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.4～30(at an input of 1800 rpm)
Output torque(N・m) 900～3570
Input speed(rpm) 0～1800
S Series
Center distance(mm) 50,60,70,80,100,120,135,155,175,200,225,250,300,350,400,450,500
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.3～255(at an input of 1800 rpm)
Output torque(N・m) 50～56600
Input speed(rpm) 0～1800
Key points when selecting a worm reduction gears
Selection
When choosing a worm reduction gears, the procedures for selecting the right gear are described in the maker catalogs and the series and models ought to be selected according to those procedures. Particular care should be taken in important areas such as selecting the load index, calculating the overhang load and examining the heat rated capacity from the manufacturer.
Cautions during use
When utilizing a worm decrease gears, heat produced through the initial period of use is high and running-in operation at 1/4, 1/2 and 3/4 of rated torque for eight hour periods is key to sufficiently attaining the performance of the worm reduction gears.
Maintenance and inspection
After completing running-in procedure (approximately 50 hours), it’s important to change the lubricating oil 
and also to change the lubricating oil from then on about 1 time each year according to the operation manual supplied by the manufacturer.
Product Description
The Worm Reduction Gear Box is provided by our company is of high-quality. Our products are created by using premium quality materials and advance technology at our vendors end. They are widely used in various sectors. Our products are often available at a very low market prices.
Motor Mount Frame Options
TEC Motors, worm decrease gearbox.
Option A-160 B5 Framework, Flange Mount.
Choice B-132 B14 Frame, Face Mount.
Option C-100/112 B5 Frame, Flange Attach.
High efficiency and safe operation. High load capability and overload functions. Result Torque = (Power (kW) x 9550 (Constant))/ Gearbox output speed (rpm).
Higher ratios on request dependent on service factor (40:1, 50:1, 60:1, 80:1, 100:1)
DESCRIPTION
Wormgears of the VF series are milestones for the market worldwide. They succeeded in merging uncompromising quality with stateoftheart technology amd renown cost effectiveness.Absolute versatility is given by the wide selection of several installation options, shaft configurations and motor interface, all offered as standard. The helicalworm and the doubleworm edition, with or without the torque limiter, also accumulate, creating a highly versatile drive system.
ADDITIONAL INFORMATION
AMP
0.42 A
EFFICIENCY
84%
HP
0.12
KW
0.09
RATIO
7
RPM
200
TEMPERATURE RATING
20 degree C TO 80 degree C
TORQUE
4 Nm
HSN
8483.40.00
WARRANTY PERIOD
12 Months
The worm reduction gears can be found in two series: X and H.
The series X, having a worm and worm wheel set, comes in versions XA with shaft and XF-XC with mounting provisions for motor.
Version XF (bell casing + coupling) provides great versatility to suit a broad selection of applications and higher efficiency than the compact range XC, where in fact the emphasis is on space performance.
Series H supplies the same features since series X with an extra plus: a spur gear pre-stage at the insight end provides higher performance and a broader range of ratios compared to the X series.
Framework sizes 110 and 90 include a cast-iron casing cast enbloc, whereas smaller sizes make use of die-cast aluminium housings. The worm shaft is produced from casehardened and hardened alloy steel and ground-finished.
The worm wheel includes a cast iron hub with cast bronze insert. Hollow result shaft comes as standard.
Broad range of possibilities:
second input, output flange, single or double extension output shaft, torque limiter with through cable, torque arm.